Classification
Bureau Veritas + Hull Mach
Class 1 fishing vessel un restricted navigation.
Main Engine Propulsion
Mitsubishi type S6 U2 MPTK 1572hp @ 960RPM
Gearbox Reintjeas type LAF 873 K41 reduction ratio 6.440-1
C P Propeller Balino – KAMEWA 60KS4.
Auxiliary engine Mitsubishi 26RM PTA - - 650KVA.
Harbour Set Mitsubishi 6D24T - - 200KVA.
Triple station controls for main engine R.P.M and propeller pitch bridge mounted.
Auxiliary Diesel
Engines
A gen set Mitsubishi diesel engine with a generator of 650 KVA 380/220volt
and 50hz.
A Mitsubishi harbour set with generator of 200 KVA 380/220 volt and 50hz.
A Stamford Newage shaft generator with 1200 KVA, 380/220 volt and 50hz.
Electrical Services
(1) Triple phase
alternating current 380V 50HZ
(2) Lighting circuits small engines single phase alternating current 220V 50hz
(3) Emergency stand by and security circuits direct current 24V.
The electrical current on the vessel that will be used to operate all
the vessel services will be supplied by the following alternators:
One shaft generator alternator of 1200kva.
One alternator of 650kva driven by aux engine.
One alternator of 200kva driven by harbour set.
The 220 V single phase service is obtained from the 380/220V transformers
of 30kva each.
Fish Rooms Refrigeration
The vessel will be outfitted with appropriate refrigeration equipment for catch
conservation in the refrigerated cargo spaces (2)
The catch will be conserved by means of direct expansion of the R-404 refrigeration
fluid in the cooling coils installed in the deck heads of the fish hold.
The refrigeration installation will be designed for the following operating
conditions:
Outside temperature…………………………………..+
35o C
Seawater temperature…………………………………+
30o C
Temperature in aft fresh
catch hold…………….......… 0o C
Temperature in fore freezer
catch hold…………. ........0o C /
-35o C
Refrigeration fluid…………………………………………R-404
In addition two blast freezers with a capacity of 1000 kg/day each will
be foreseen.
Installation operation will be semi-automatic with manual start –up
and automatic stopping by means of pressure gauges and manual-electrical
regulation
of capacity.
The conservation and freezing refrigeration installation for hold and blast
freezers will consist mainly of 3 electric compressor make BITZER or similar,
screw type, operated by a 40 bhp electric motor and all the necessary elements
as condensers, pumps, valves, etc.
This refrigeration installation will be supplied complete including the first
loads of refrigerating fluid, and unfreezable oil.
A ice-flake generator GENEGLACE 100 M or similar will be installed with a capacity
of 2,500 kg/day working with sea water, with its corresponding refrigeration
unit.
Deck Machinery all Rapp Manufacture
2 x splitwinches model TWS 4026
Wire capacity 2670m – 26mm DIA
1 x third split winch model TWS 4525.
Wire capacity 2670m-26mm DIA
2 x Gilson winches model GW 2200
Storage capacity 787 / 26mm
1 x double net drum model NDD – 2500
Capacity each approx 8m3
4 x sweep line winches SW2500
Storage capacity 3.1m3 each.
2 x Out haul winch model M12.3.97.11
Storage capacity 250m 18mm
2 x Cod end winches model M25.7.86.3
Storage capacity 78m of 26mm wire.
1 x Anchor winch model MW7, 0/101
1 x deck crane type 170.90MA @ 1100KG capacity
1 complete hydraulic drive system remote control and automatic trawl system.
Hydraulic main drive system
4 x electro hydraulic pump units
120kw/3 x 380v/50hz/1460 rpm/1p55.
2 x electro hydraulic pump units
82 KW/3 X 380V/50 HZ/1460 rpm/1p55
1 x electro hydraulic pump unit
7.5 KW/3 x 380V/50HZ/1460RPM/1P55 for remote control
1 x Rapp Hydema trawl computer model PTS – Pentagon.
Electronic Fish Finding and Navigation Equipment.
A detailed list of all wheelhouse electronic equipment will be made available
to prospective purchaser; all of the equipment is mainly “Furuno”
Life Saving Fire Fighting.
The vessel will be totally outfitted with all life saving and fire fighting
to comply with all International rules and regulations. |